Swivel Mount Accessories

 

 

JR-100 Flex Base Bracket  $29.95

Todayís Consoles keep getting more and more streamline, leaving no room or flat area to mount your electronics. The Johnny Ray Flex Base is here to solve that problem. No matter if you are doing a new installation, or adding an additional electronic unit, the Flex Base has you covered. Itís Small, 2Ē Square footprint allows for compact mounting. If added height is what you need, the Flex Base also allows for an additional 3 3/4Ē (5Ē when using a Johnny Ray Mount) from the mounting surface. And with 180 degrees of rotation, the Flex Base can even provide mounting on side rails and gunnels.

This no-nonsense bracket allows you to create a level platform for your electronic unit on virtually any angle surface, lock it in place, and forget it. The rigid Stainless Steel Design wonít flop around, or drop out of sight, and, providing you a safe, secure way of mounting your units to your boat.

 

See JR-100 Flex Base Bracket  Specs                 Buy It Now

 

Shown at left above: JR-100 Flex Base Bracket.

Shown at left below: JR-100 and JR-300B Swivel Mount Base mounted.

   

 

 

JR-400HLP-T Swivel Top/Mounting Plate Combo $29.95

  • JR-400HLP-T comes with our JR-400 Swivel Mount Top already installed with a HLP Plate and Hardware
  • Must Use JR-300B Push Button Style Mounting Base (sold separately)
  • Simply locate your Unitís base onto the plate, and drill hole pattern accordingly.
  • Smaller Humminbird Models like PirranahMAX, can be drilled & reverse bolted from underside to match Electronic hole pattern. (Nuts and washers exposed

 

                                                              Buy It Now

 

 

JR-400HLP-M Complete Swivel Mount Assembly $41.95

  • Machined from Durable 6/6 Nylon, just like our patented Swivel Mounts for corrosion resistance and long life
  • JR-400HLP-T comes with our JR-400 Swivel Mount Top already installed with a HLP Plate and Hardware, and JR-300B Swivel Base.
  • Simply locate your Unitís base onto the plate, and drill the Electronics pattern accordingly into the HLP Plate
  •  Smaller Humminbird Models like PirranahMAX, can be drilled & reverse bolted from underside to match Electronic hole pattern. (Nuts and washers exposed at top)

 

                                                              Buy It Now

JR-300B Mounting Base Only $24.95

  • Same Base used under all JR-300, JR-400 and JR-500 Swivel Mounts
  • Allows for multiple locations in your boat or for storage of unit
  • Same quality components used  throughout
  • Push-button Release Design
  • Accepts all JR-300, JR-400, or JR-500 Tops

See More JR-300B Mounting Base Specs           Buy It Now

 

 

JR-203B Mounting Base Only $31.95

  • Same Base used under all JR-203 and JR-204 Swivel Mounts
  • Allows for multiple locations in your boat or for storage of unit
  • Same quality components used  throughout
  • Snap On / Off Release Design
  • Accepts all JR-203 or JR-204 Top

See More JR-203B Mounting Base Specs          Buy It Now

 

 

JR-205B Mounting Base Only  $38.95

  • Same Base used under all JR-205, JR-206, JR-207, JR-208, JR-209, & JR-210 Swivel Mounts
  • Allows for multiple locations in your boat or for storage of unit
  • Same quality components used  throughout
  • Lever Release Design
  • Accepts all JR-205T, JR-206T or JR-207T, JR-208T, JR-209T, & JR-210T  Tops

See More JR-205B Mounting Base Specs         Buy It Now

 

JR-300MP Mounting Plate for Push Buttons Swivel Mounts $4.95

  • Raises Swivel Mount overall height by 3/8 Inch.
  • Doubles as a Wiring Hole Cover to hide wire routing underneath the Swivel Mount Base
  • Provides a Solid, Secure Mounting Area on carpeted surfaces to allow easier Push Button operation
  • Can be used under any Push Button Release style Swivel Mount
  • Can be stacked in Multiples to allow for additional Clearances or bigger wiring.

See More JR-300MP Mounting Plate Specs         Buy It Now

 

JR 300, JR-400 and JR-500 Swivel Mount Tops  

 

  • JR-300T Swivel Top Accepts JR-300B Push-Button Release Style Bases Only

See JR-300T Swivel Top Applications      $16.95   Buy It Now

See JR-300T Swivel Top Specs             Find Your Electronic Model

  • JR-400T Swivel Top Accepts JR-300B Push-Button Release Style Bases Only

  • JR-500T Swivel Top Accepts JR-300B Push Button Release Style Bases Only

See JR-500T Swivel Top Applications       $16.95    Buy It Now

See JR-500T Swivel Top Specs             Find Your Electronic Model

 

 

 

 

JR-203 and JR-204 Swivel Mount Top Only   

 

 

  • JR-203T Swivel Mount Tops Accept JR-203B Snap On / Off Style Bases Only

See JR-203T Swivel Top Applications     $24.95     Buy It Now

See JR-203T Swivel Top Specs           Find Your Electronic Model

  • JR-204T Swivel Mount Tops Accept JR-203B Snap On / Off Style Bases Only

See JR-204T Swivel Top Applications     $24.95     Buy It Now

See JR-204T Swivel Top Specs            Find Your Electronic Model

 

 

JR-205, JR-206 and JR-207 Swivel Mount Tops Only 

 

 

  • JR-205T Swivel Mount Tops Accept JR-205B Lever Release Style Bases Only

See JR-205T Swivel Top Applications     $31.95     Buy It Now

See JR-205T Swivel Top Specs           Find Your Electronic Model

  • JR-206T Swivel Mount Tops Accept JR-205B Lever Release Style Bases Only

See JR-206T Swivel Top Applications      $31.95     Buy It Now

See JR-206T Swivel Top Specs              Find Your Electronic Model

  • JR-207T and JR-208T Swivel Mount Tops Accept JR-205B Lever Release Style Bases Only

See JR-207T Swivel Top Applications     $27.95      Buy It Now

See JR-207T Swivel Top Specs              Find Your Electronic Model

  • JR-209T and JR-210T Swivel Mount Tops Accept JR-205B Lever Release Style Bases Only

See JR-210T Swivel Top Applications      $31.95      Buy It Now

See JR-210T Swivel Top Specs              Find Your Electronic Model